• Multi-function: electrical, frequency, temperature and pressure parameters
• 5 Channels for simultaneous measurement and sourcing of mA, V, Ohms, frequency, pressure, RTDs and Thermocouples, HART, Fieldbus
• Pressure system generates 100 bar/1,500 psi pneumatic and 1,000 bar/15,000 psi hydraulic pressures
• Accuracy to 0.0025%rdg+ 0.002%FS 
• Connectivity: Bluetooth, USB and Wifi 

• Multi-function calibrator: electrical, frequency and pressure parameters
• Pressure range from 0 to 20 bar
• Accuracy to 0.0185% FS
• Simple, easy-to-use touch screen operation
• Simplified touch screen interface with application DASHBOARD, quick TASK selection and FAVOURITES storage
• Calculates PASS/FAIL errors, documents results and interfaces with calibration software        

• Multi-function calibrator: electrical, frequency and pressure parameters
• Three models available: 
   - DPI 612: 95% vacuum to 20bar/300 psi
   - DPI 612: 95% vacuum to 100 bar/1500 psi
   - DPI 612: 0 to 1000 bar/15000 psi 
• Simple, easy-to-use touch screen operation        
• Hydraulic or Pneumatic Pressure versions
• Connectivity: Bluetooth, USB and Wifi

• Ranges 0 to 70 mbar through to 700 bar (0 to 1 psi through to 10,000 psi)
• 16 pressure units
• Barometric version
• Impact resistant, sealed to Type 12/IP54
• Rugged, lightweight handheld design
• Leak test, tare, max/min and filter
• Intrinsically safe version
• Optional pneumatic and hydraulic hand pumps 

• Pressure ranges 70mbar to 1400bar (10 to 20,000 psi) 
• 0.05% full scale accuracy
• % pressure indication with bar graph for visual reference
• Temperature compensated accuracy from -10°C to 50°C (14°F to 122°F) 
• Pressure switch test, Min/Max, tare and alarm functions
• Adjustable mounting positions

• Up to three pressures displayed simultaneously
• Pressure ranges up to 1000 bar (14500 psi/100 MPa)
• Choice of precision up to 0.005% FS
• Long term stability up to 0.01% Rdg per annum
• Barometric reference option
• Negative gauge calibration included as standard

• Single channel pressure controller chassis
• High speed pressure control
• Up to 210 bar (3000 psi/21 MPa) gauge & absolute
• Accuracy 0.0016% Rdg (+0.0033% FS)  Độ chính xác đạt 0.0016% Rdg (+0.0033% dải đo)
• Precision to 0.001% FS over calibrated temperature range
• Long-term stability up to 0.01% rdg per annum

• Dual channel pressure controller chassis 
• Selection of Chassis and interchangeable control modules Single, dual or auto range control module configurations
• High speed pressure control
• Up to 210 bar (3000 psi/21 MPa) gauge & absolute
• Accuracy 0.0016% Rdg (+0.0033% FS)  
• Precision to 0.001% FS over calibrated temperature range
• Long-term stability up to 0.01% rdg per annum 

• Multi-function “4 in 1” handpump
• Pneumatic pressures to 60 bar (900 psi)
• Hydraulic pressures to  700 bar (10,000 psi)
• Generates vacuum to -28.5 inHg
• Vacuum priming for hydraulic systems
• Excellent low pressure control
• Adjustable overpressure protection

• Dual source of pneumatic pressure and vacuum
• Pneumatic pressure in excess 40 bar (600 psi)
• Generates vacuum to 28.5 inHg
• Adjustable stroke Built-in fine adjust vernier
• Needle valve for controlled pressure release

• Hydraulic pressure up to 1000 bar (15,000 psi)
• Compatible with many different liquids
• Large transparent 100cc capacity reservoir
• Quick priming and pressure generation using scissor action pump
• Controlled pressure release and adjustment
• High pressure / priming selector

Air data test sets, also referred to as Pitot Static testers, are used for testing and calibrating airspeed and aircraft pitot-static systems. In the Aviation industry, testing is required when on-board instruments are manufactured, repaired, calibrated or integrated into the aircraft. 

Air data test sets, also referred to as Pitot Static testers, are used for testing and calibrating airspeed and aircraft pitot-static systems. In the Aviation industry, testing is required when on-board instruments are manufactured, repaired, calibrated or integrated into the aircraft. 

The new ADTS500 Series of pitot static testers provides a smarter way to perform standard aircraft maintenance, troubleshooting, fault-finding and emergency aircraft on ground instrumentation validation.

• 3 grades of performance: Industrial (+/-0.2% FS BSL), Improved (+/- 0.1% FS BSL) and Premium (+/- 0.04% FS BSL)
• UNIK 5000 can operate in temperature ranges from -55 °C to +125 °C
• With broad pressure range operation from 70 mbar (1psi) to 700 bar (10,000 psi) UNIK 5000 is referenced to gauge, and absolute with both wet/dry and wet/wet differential options
• UNIK 5000 has multiple options: voltage, millivolts, and milliamps.  

• High precision, ±0.01% FS over compensated temperature range
• High stability, ±100 ppm FS/year
• Offering a wide range of pressure and electrical connections to allow flexible customization
• Wide temperature range, -40 °C to +85 °C (-40 °F to 185 °F)
• Designed with brand new TERPS technology
• Multiple output configurations, TTL and Diode, RS-232 and RS-482

• Ranges from 0.75 mH20 to 600 mH20
• Accuracy to ±0.06%
• Fully welded 17.5 mm titanium construction
• Integral lightning surge arrestor option
• Polyurethane and hydrocarbon resistant cables
• Full range of installation accessories

• GE's RTX 1000H (HART) Series provides a choice of user rangeable pressure transmitters with HART® digital signal superimposed.
• Offering turndowns up to 100:1 and ranging from 50 mBar to 1400 bar (0.75 psi to 20,000 psi), 
• RTX 1000 covers the widest range of gauge and absolute pressure applications available on the market.

• DPI 800/802 Druck Pressure Indicator/Loop Calibrator DPI 800/802 is a Druck product. Druck has joined other GE high-technology sensing businesses under a new name_GE Sensing.
• Ranges from 10 in H2O to 10,000 psi (25 mbar to 700 bar)
• Single or dual range configuration
• IDOS pressure sensors provide accuracies to 0.05% FS all-inclusive or 0.01% precision
• mA measure, switch test and 24V loop power
• Large backlit display, menu driven interface
• HART® loop resistor
• Robust and weatherproof
• Compact, simple to use, easy to carry
• Convenient, one-handed operation
• Secure grip, impact resistant, elastomer protected
• Plug/play connector for IDOS Universal Measurement Modules

• GE's UPS-II loop calibrator is an advanced handheld process calibrator tool from our Essential range.
• It can power (24 VDC) and read 2-wire transmitters to perform field calibrations.
• Output currents are adjustable to a resolution of 10 microamps in both source and transmitter simulation.

• 4Sight calibration management software will help you comply with regulations, reduce running costs and improve process efficiency.
• 4Sight software from GE will be your calibration manager.
• Its automated workflow, robust data and complete traceability can significantly reduce calibration and maintenance costs.

• Intecal v10 is an easy-to-use calibration management software program for generating calibration procedures, scheduling work and documenting results.
• It is designed to automate calibration management for all GE Druck pressure & temperature calibrators and pressure controllers.
• Download a free 30 day trial of Intecal v10 from the Product Download section at the bottom of the page.